Ocean view through a slightly opened wood outswing casement door in a modern living and dining room

Outswing Doors

An entrance should make a statement. Make one with our outswing exterior doors, carefully crafted with authentic detailing to meet your design vision. Customized to meet the exact opening of our client-architect’s design, our outswing doors are available in a variety of wood species and with simple hardware.

Outswing Doors Data Sheet

Standard Hardware (residential applications only)

Lockset
Heavy duty mortise construction. Half-turn lever controls hook bolts, dead bolt, and latch. Hook bolt assembly fully mortised into rail to provide 3- or 4-point latching at frame and adjacent door/frame. Locking mechanism incorporates a standard US cylinder. Based on G-U Cremona or Tripact door bolt system.

Finishes: Yellow Dichromate or black powder coated steel. Cremona locksets are available in stainless steel.

Escutcheons / Lever Handles
Escutcheons, roses, and lever handles are available in a variety of styles and configurations from various manufacturers.

Finishes: A variety of finishes are available from various manufacturers.

Hinges
Solid brass 4 1/2" x 4 1/2" five-knuckle ball-bearing butt hinges, minimum 1½ pair per leaf, in manufacturer’s standard finishes.

Finishes: A variety of finishes are available from various manufacturers.

Commercial Hardware

Most commercial hardware can be incorporated into our door panels, including flush bolts, exit devices (rim, mortise, surface vertical rod and concealed vertical rod), door closers, electric strikes, and others.

NOTE: Some hardware installations may require modifications to door leaf or frame detailing, such as concealed closers and meeting rail weather-strip at concealed vertical rod assemblies. Contact factory for assistance. Hardware must be suitable for our standard 2 1/4” leaf thickness.

Optional Hardware

Screen doors, astragals, ADA-compliant metal thresholds

Glazing

All glazing is per project specifications. Duratherm can accommodate most configurations and make-ups from 1/8" single glazed to a maximum of 1" security glass.

Clear glass opening: Unit height minus 15 5/8", unit width minus 14 1/2".

Weather-Stripping

Continuous extruded silicone flap gasket set in rebate in door frame around perimeter of door panel. Engaging the multi-latchpoint espagnolettes (standard hardware) compresses the weather-strip to ensure a tight seal.

Sizing

The minimums and maximums shown are intended as guidelines. For applications that exceed these ranges, please contact the factory for assistance.

Width
Minimum: 24”
Maximum: 48"

Height
Minimum: 74”
Maximum: 120"

ADA Compliance
Clear-opening sizing based on 32" clear width requirement.
Minimum unit width: 36 1/2" (assuming 180° door swing)

NOTE: Standard wood threshold may not meet ADA maximum height requirements. Doors that are not able to open a full 180° may need to increase in width.

Consult factory with specific clearance questions

Frame Depths/Leaf Thickness
Standard primary door leaf thickness: 2 1/4"
Standard screen door leaf thickness: 1 3/8"
Standard frame depth *: 6 1/4"
Minimum frame depth *: 4 3/4"
Maximum frame depth: 10"

* Contact factory for frame depths less than 6¼".

NOTE: When screen doors are specified, handle clearances must be considered when determining appropriate frame depths.

MechanicalResults
Static Air Infiltration:
ASTM E283 cfm/ft2 @ 1.57 psf

Allowed 0.30 Test Result 0.004

Water Infiltration:
ASTM E547-cyclic ASTM E331-static at 8 psf

Allowed 0.0 Test Result 0.0

Load Deflection:
ASTM E330 10 sec at +60 and -60 psf

Passed

Sash Torsion:
AAMA/WDMA/CSA 101 / I.S.2 / A440

N/A

Vertical Deflection:
AAMA/WDMA/CSA 101 / I.S.2 / A440

N/A

Forced Entry:
ASTM F588

Passed

Thermal TransmissionResults

Center of Glass:
ASTM C-236 U-value using Viracon VE1-2M Low E glass and Lawrence Berkeley Laboratories Winow 5.2 analysis program.

NFRC certified.

1": 0.29 with Argon: 0.24

Hurricane ImpactResults
Large Missile Impact and Cyclical Air Pressure:
  • ASTM E1996-05, ASTM E1886-05
  • Tested at 42 psf
  • Wind Zone 3, not including Dade County, FL
  • Missile Level D

Note: Contact factory for size limitations and detail modification required for hurricane certified units.

Passed

Wood Species & Finishes

Duratherm sources all materials by project — from only providers we know and trust. Many of our woods are from Forest Stewardship Council® (FSC- C108949) certified sources. We obtain others from sustainably harvested plantations. Fourteen domestic and exotic wood species offer a wide range of colors, grains, and textures.

Please contact us for information about finishing options (including paint, Sikkens, clear lacquer, stain, bleach stain, oil, etc.) and to discuss the use of a species not in our standard offering. We consider availability, durability, machining, and gluing characteristics to determine the feasibility of your choices.

Exterior Wood Species

  • African Mahogany
    Exterior

  • Cypress
    Exterior

  • Honduran Mahogany
    Exterior

  • Jarrah
    Exterior

  • Redwood
    Exterior

  • Sapele Mahogany
    Exterior

  • Spanish Cedar
    Exterior

  • Teak
    Exterior

Interior Wood Species

  • African Mahogany
    Interior

  • Ash
    Interior

  • Cherry
    Interior

  • Cypress
    Interior

  • Douglas Fir
    Interior

  • Honduran Mahogany
    Interior

  • Maple
    Interior

  • Red Oak
    interior

  • Sapele Mahogany
    Interior

  • Spanish Cedar
    Interior

  • Teak
    interior

Outswing Door Detail

1HEAD

2LATCH JAMB

3SILL

4MEETING STILE

Glazing

Dry Glazing

Specially developed extruded silicone gasket sets the glass by compression. Our proprietary system is long-lived, low maintenance and water resistant.

Wet Glazing

Our special silicone wet glazing compound bonds to the glass for long-lived sealing. Plus, our continuous extruded silicone weatherstrip runs around the frame perimeter and the seal is not compromised by seasonal expansion and contractions of the sash and frame.